- Buttons - mount the buttons on any flat vertical surface. Readysaw only needs two buttons to engage with. There are (3) button keyholes on the back on 6" center-to-center spacing allowing for some versatility on height depending on which keyholes you mate to the buttons.
- We have drilled and tapped a Stronghand™ F-Clamp and mounted buttons to the clamp. The clamp can then be clamped to a horizontal surface such as a welding table or bench when another mounting surface is not available. The clamp still remains very useable as a clamp with the buttons attached. The buttons will need to be spaced of of the clamp body to clear the moving arm of the clamp (pictures to come)
- There are small screw holes above each of the button keyholes on the back of the channel. The unit may be screwed to a suitable vertical surface if you do not plan on moving your Readysaw often.
- Clamp the top and bottom flat areas of the back channel with vice grips to a flat table leg or I-beam etc.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
